Hi, There isn't one. Out of curiosity - do you have to tunnel (i.e. the other end of that service is on a layer 2 device) or could you get away with simple 'forward'?
kind regards Pshem On 6 February 2014 09:37, Jason Lixfeld <[email protected]> wrote: > On an ME3400, I can see how l2protocol-tunneling is behaving: > > pe01.156FrontStW01.YYZ#show l2protocol-tunnel > COS for Encapsulated Packets: 5 > Drop Threshold for Encapsulated Packets: 0 > > Port Protocol Shutdown Drop Encaps Decaps Drop > Threshold Threshold Counter Counter > Counter > ------------------- ----------- --------- --------- --------- --------- > --------- > Fa0/7 cdp ---- ---- 0 0 > 0 > lldp ---- ---- 3474 0 > 0 > stp ---- ---- 252958 0 > 0 > vtp ---- ---- 0 0 > 0 > --- ---- ---- ---- ---- > ---- > --- ---- ---- ---- ---- > ---- > --- ---- ---- ---- ---- > ---- > > pe01.156FrontStW01.YYZ# > > On an ME3600, however, the command is nowhere to be found and my google-fu > seems to be sedated. > > ! > interface GigabitEthernet0/7 > switchport trunk allowed vlan none > switchport mode trunk > mtu 1600 > no keepalive > service instance 888 ethernet > encapsulation default > l2protocol tunnel > xconnect 72.15.50.96 888 encapsulation mpls > backup peer 72.15.50.98 888 > ! > > Any ideas? > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
