On Fri, Feb 14, 2014 at 07:09:57PM +0300, Ahmed Hilmy wrote: > Hi Experts, > > Kindly, our node 7606 has been reloaded due to below log: > %CONST_DIAG-SP-2-HM_SUP_CRSH: Supervisor crashed due to unrecoverable > errors, Reason: Failed TestSPRPInbandPing > c7600rsp72043_rp-ADVIPSERVICES-M), Version 12.2(33)SRB2 >
You have read this? http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/71095-6500-system-crash-ts.html If there is any corruption in the TCAM entries, the SPRPInbandPing test can fail. If the test, ran as part of Cisco Generic Online Diagnostics (GOLD), fails 10 times consecutively, then the supervisor engine can crash. In order to resolve the issue, upgrade the Cisco IOS software to a release not affected by Cisco bug ID CSCsc33990 (registered customers only) . If health-monitoring is enabled on the device and complete diagnostics is configured during the startup, then the supervisor can crash at the time of the boot process. Health-monitoring and complete diagnostics conflict with each other for some tests. As a workaround, disable either of them, which depends on your requirement. Search for the error message - first hit ... 12.2(33)SRB2 is affected says the list ... Flo -- Florian Lohoff [email protected]
signature.asc
Description: Digital signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
