On Feb 19, 2014, at 11:32 AM, Aled Morris wrote: > On 19 February 2014 16:20, Adam Greene <maill...@webjogger.net> wrote: > >> Assuming the customer goes with the ASR1002-X, which still seems to me to >> be >> the best forward-looking option for this particular customer's needs, in >> order to get an Advanced IP Services license (which I assume is the minimum >> to run BGP/OSPF), would they just need to add P/N SLASR1-AIS into their >> order? >> > > They would but I believe "basic" BGP and OSPF are in IP BASE so it isn't > needed in this case, unless you need some specific features like BFD or > OSPFv3 for IPv6.
I have a 1002-x in my garage waiting to be staged (powered off at the moment because it is the loudest piece of 2U equipment I've ever encountered). It's IP Base while I wait on the reseller and cisco to give us the smartnet access we paid for already. Is verifying if bgp is available in base as simple as typing "router bgp" and seeing if it complains? If so, I'll power it up and check. Oh, also a note to those new to the platform and coming from the 7200 series, you can't just turn the router off. You have to reload, watch the console, and power off when you see the bootloader. That seems pretty hokey to me. I suppose your protection if you don't trust your colo provider is to have multiple boot devices in the box in case one gets garbled on power loss. Charles > I use this tool (but I don't know how accurate it is) > http://tools.cisco.com/ITDIT/CFN/jsp/compareImages.jsp > > Aled > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/