Documentation implies that Sup2T can match length in an ACL http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/15-0SY/configuration/guide/15_0_sy_swcg/qos_class_mark_police.html
======================= Match criteria Access control list (ACL). *Note *Use ACLs to match the following: --CoS value --VLAN ID --Packet length ======================= On Thu, Feb 27, 2014 at 9:54 AM, Dobbins, Roland <[email protected]> wrote: > > On Feb 27, 2014, at 9:50 PM, Brian Turnbow <[email protected]> wrote: > > > There is more info here on it > > Does that still apply to Sup2T/DFC4? > > ----------------------------------------------------------------------- > Roland Dobbins <[email protected]> // <http://www.arbornetworks.com> > > Luck is the residue of opportunity and design. > > -- John Milton > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
