Hi Steve,
> Is anyone familiar with the 3800X and why we are unable to configure EIGRP > for IPv6 even though its clearly stated in the configuration guide as > available? > > http://www.cisco.com/c/en/us/td/docs/switches/metro/me3600x_3800x/software/r > elease/15-3_1_S/configuration/guide/3800x3600xscg/swipv6.html#wp1117377 > > We are a cisco only shop and prefer to use EIGRP to distribute our loopbacks > and backbone links and we've came across this issue while trying to dual > stack. > > I suspect this is an error in the document as the commands simply aren't > there, if so - anyone got any inside info on if cisco plan to support eigrp > for IPv6 on their own switch anytime soon!? According to the feature navigator "IPv6 Routing - EIGRP Support" on the ME3800 is supported only in 15.1(2)EY, but not in newer trains. The documentation you are referring to is most likely wrong: there is no actual configuration example of IPv6 + EIGRP (on the other hand there is for IPv6 RIP and OSPF). I suspect this is unsupported. Regards, Lukas _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
