-----Ursprungligt meddelande-----
From: Herro91
Sent: Friday, March 14, 2014 10:14 PM
To: Cisco-nsp
Subject: [c-nsp] Double NAT on IOS help or Destination NAT?
Hi All,
I need a little help figuring out the right config for NAT - I think I need
Double NAT on IOS, but not sure.
Here is the situation:
1) I need to nat an outside host address (not directly connected to my
router) to an internal address on the router.
2) I need that natted internal address from step 1 to be routed to a host
that will only respond to devices on the same subnet
3) I need the reverse reply traffic to be returned.
---------------------------------------------------------------------------------------------
I wrote a post about pretty much exact that scenario a while back if I
understood you correctly:
http://packetpushers.net/nat-saves-the-day/
Daniel Dib
CCIE #37149
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
