Hello, I am looking for configuration help to perform double NAT on IOS. I need to configure the following:
1) NAT the destination host address to a public IP address on the router. 2) NAT the source address of a workstation that is not directly connected to the router to an IP address of a subnet directly connected to the inside of the router. Public Host-------Internet-----------Router----------Private Host (172.16.0.12) Thanks! -Doug _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
