Hi all, We recently had a problem where a port was flapping, the port was a member of a port channel. The port was joining and leaving the port channel continuously, it caused major network problems. After speaking to TAC they said the port leaving the port channel was causing a network loop, as it still maintained the config of the port channel. I started looking at some of our management software but could not see any peaks in traffic.
Anyway the recommendations are to use the command, port-channel standalone-disable. Has anyone had any experience with this command?, what are the benefits?, and how does it work?. Rgds Harry ---------------------------- http://www.bbc.co.uk This e-mail (and any attachments) is confidential and may contain personal views which are not the views of the BBC unless specifically stated. If you have received it in error, please delete it from your system. Do not use, copy or disclose the information in any way nor act in reliance on it and notify the sender immediately. Please note that the BBC monitors e-mails sent or received. Further communication will signify your consent to this. --------------------- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
