Yes, I did, but my point is that behavior is not the same or at least appears not to be the same on IOS, I want ibgp multipath but only for things with matching IGP metrics, is there a way to tweak that.
-----Original Message----- From: Oliver Boehmer (oboehmer) [mailto:[email protected]] Sent: Monday, March 31, 2014 11:26 AM To: John van Oppen; [email protected] Subject: Re: [c-nsp] interesting ASR 9k bgp multipath issue >so, I have some internally anycasted prefixes (DNS resolvers) as well as >bgp maximum paths set to allow both ibgp and ebgp multipath. Oddly, as >you can see below the multipath appears to think two paths are >identical even when they have different IGP metrics (path #1 and path #2), any >idea >if this is a bug or how to fix it? Obviously if the IGP cost is the >same it should load share, but if not it really should not be doing >what is shown below since the paths are not equal. John, what exactly did you configure in your BGP address-family? It looks like you enabled "maximum-paths eibgp <n>", which also considers paths with different metrics as multipath candidates. oli _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
