Hi, https://supportforums.cisco.com/discussion/10810196/no-radius-accounting-when-redundancy-inter-device-configured
Seems to have solved the issue. Accounting now working. -- Chris. On Sat, Apr 5, 2014 at 2:21 PM, Chris Knipe <[email protected]> wrote: > Hi Guys, > > I'm hoping that someone can assist in debugging something rather strange. I > have a 7206 (NPE-G1) terminating PPPoEoE sessions. AAA is working fine and > Authentication as well as Authorization happens as expected. However, for > some reason, the 7200 refuses to send any Accounting information. I'm sure > this must be something stupid and small that I am overlooking - hopefully a > fresh pair of eyes will spot what I'm failing to see! :-) > > Version: > Cisco IOS Software, 7200 Software (C7200-ADVSECURITYK9-M), Version > 15.2(4)M4, RELEASE SOFTWARE (fc2) > > Relevant configurations: > aaa new-model > aaa session-mib disconnect > aaa group server radius MYRADIUS > server x.x.x.43 auth-port 1812 acct-port 1813 > ip radius source-interface Loopback0 > attribute nas-port format a > load-balance method least-outstanding > mac-delimiter colon > aaa authentication login MYRADIUS group radius local > aaa authentication ppp default group MYRADIUS > aaa authorization exec MYRADIUS group radius local > aaa authorization network default group MYRADIUS > aaa accounting send stop-record always > aaa accounting delay-start > aaa accounting session-duration ntp-adjusted > aaa accounting update newinfo periodic 30 > aaa accounting network default start-stop group MYRADIUS > aaa nas port extended > aaa session-id common > > radius-server attribute 44 extend-with-addr > radius-server attribute 6 mandatory > radius-server attribute 32 include-in-access-req > radius-server attribute 32 include-in-accounting-req > radius-server attribute nas-port format b > radius-server attribute 61 extended > radius-server attribute 31 mac format ietf upper-case > radius-server host x.x.x.43 auth-port 1812 acct-port 1813 key 7 a > radius-server retransmit 2 > radius-server timeout 10 > radius-server unique-ident 5 > radius-server load-balance method least-outstanding > > debug aaa accounting: > 000279: Apr 5 12:12:09.718: AAA/ACCT/CLIENT(0000001A): recv 1000000000bps > xmit 1000000000bps > 000280: Apr 5 12:12:09.718: AAA/ACCT/HC(0000001A): Register PPPoE/5B00001C > 64 bit counter support not configured > 000281: Apr 5 12:12:09.718: AAA/ACCT/HC(0000001A): Update PPPoE/5B00001C > 000282: Apr 5 12:12:09.718: AAA/ACCT/HC(0000001A): no HC PPPoE/5B00001C > 000283: Apr 5 12:12:09.718: AAA/ACCT/EVENT/(0000001A): CALL START > 000284: Apr 5 12:12:09.718: Getting session id for NET(0000001A) : > db=6AB5C8B8 > 000285: Apr 5 12:12:09.718: AAA/ACCT(00000000): add node, session 215 > 000286: Apr 5 12:12:09.718: AAA/ACCT/NET(0000001A): add, count 1 > 000287: Apr 5 12:12:09.718: AAA/ACCT/NET(0000001A): Pick method list > 'default' > 000288: Apr 5 12:12:09.718: AAA/ACCT/SETMLIST(0000001A): Handle 0, mlist > 6A148168, Name default > 000289: Apr 5 12:12:09.718: AAA/ACCT/EVENT/(0000001A): ATTR REPLACE > 000290: Apr 5 12:12:09.718: AAA/ACCT(0000001A): Accounting response status > = FAILURE > 000291: Apr 5 12:12:09.718: AAA/ACCT(0000001A): Send NEWINFO accounting > notification to EM successfully > 000292: Apr 5 12:12:09.718: AAA/ACCT/EVENT/(0000001A): ATTR REPLACE > 000293: Apr 5 12:12:09.718: AAA/ACCT/EVENT/(0000001A): ATTR REPLACE > 000294: Apr 5 12:12:09.838: Getting session id for NET(0000001A) : > db=6AB5C8B8 > 000295: Apr 5 12:12:10.842: Getting session id for NET(0000001A) : > db=6AB5C8B8 > 000296: Apr 5 12:12:10.850: AAA/ACCT/NET(0000001A): Pick method list > 'default' > 000297: Apr 5 12:12:10.850: AAA/ACCT/SETMLIST(0000001A): Handle 0, mlist > 6A148168, Name default > 000298: Apr 5 12:12:10.850: AAA/ACCT/EVENT/(0000001A): NET UP > 000299: Apr 5 12:12:10.850: AAA/ACCT/CLIENT(0000001A): recv 1000000000bps > xmit 1000000000bps > 000300: Apr 5 12:12:10.850: AAA/ACCT/HC(0000001A): Update PPPoE/5B00001C > 000301: Apr 5 12:12:10.850: AAA/ACCT/HC(0000001A): no HC PPPoE/5B00001C > 000302: Apr 5 12:12:10.862: AAA/ACCT/EVENT/(0000001A): IPCP_PASS > 000303: Apr 5 12:12:10.862: AAA/ACCT/NET(0000001A): Queueing record is > START > 000304: Apr 5 12:12:10.862: AAA/ACCT(0000001A): Accounting method=MYRADIUS > (RADIUS) > 000305: Apr 5 12:12:10.862: AAA/ACCT/NET(0000001A): Suppressed record <<< > Accounting supressed and not sent. > 000306: Apr 5 12:12:10.862: AAA/ACCT(0000001A): mlist_periodic is not set, > interval 0 > 000307: Apr 5 12:12:10.862: AAA/ACCT(0000001A): Resetting Periodic timer > 600 > > Many thanks, > Chris. > > > -- Regards, Chris Knipe _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
