-----Original Message----- > From: "Raheel Muhammad" <[email protected]> > > I am facing issues in xconnect, encapsulation is l2tp and xconnect is > showing up, but the traffic is not passing, any suggestions? configuration > is below: > > interface GigabitEthernet9/8.2521 > encapsulation dot1Q 2521 > xconnect 10.11.52.6 200 encapsulation l2tpv3 pw-class 200 > end > > pseudowire-class 2521 > encapsulation l2tpv3 > ip local interface Loopback0 > ... > > PE-II > > interface GigabitEthernet3/0/2.2521 > encapsulation dot1Q 2521 > xconnect 213.132.242.208 200 encapsulation l2tpv3 pw-class 200 > end > ... > > pseudowire-class 200 > encapsulation l2tpv3 > ip local interface Loopback0 >
Looks to me like you pw-class isn't correct on the first router: > xconnect 10.11.52.6 200 encapsulation l2tpv3 pw-class 200 ^^^ > pseudowire-class 2521 ^^^^ -- Jerry Bacon Senior Network Engineer StarTouch, Inc. http://www.startouch.com 360-543-5679 ext. 111 Microwave - Fiber Optics - Internet Services _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
