Hello We have previously had problems with SFPs that has the ability to link up on 10/100/1000. Even Ciscos own 10/100/1000 SFPs dosent work there for us at least. When we insert an SFP that can only establish a link on 1000mbit then it has worked so far for us regardless of manufacturer.
Bästa hälsningar / Best regards, Gustav Uhlander Senior Communication & Infrastructure Engineer Steria AB Kungsbron 13 Box 169 SE-101 23 Stockholm Sweden Tel: +46 8 622 42 15 Fax: +46 8 622 42 23 Mobile: +46 70 962 71 03 gustav.ulan...@steria.se www.steria.se -----Original Message----- From: cisco-nsp [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Charles Sprickman Sent: den 23 april 2014 07:08 To: Mike Hale Cc: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] ASR-1K and 3rd party sfps On Apr 23, 2014, at 12:39 AM, Mike Hale wrote: > We've seen really weird behavior with third party SFPs in the past. > NHR has been surprisingly solid for us across all out platforms so far > *knock on wood*. > > We've got some Finisar-branded SFPs in our ASR which work nicely (but > that's expected since Finisar is the OEM, IIRC, for Cisco's SFPs). > > Actually...check this out. > > https://supportforums.cisco.com/discussion/11445646/advice-needed-cisc > o-asr-1002-routers-sfps > > The GLC-T don't appear to be supported on first glance. The GE-T are. > Since your vendor calls them GLC-T (even though they claim to be > GE-T), that might be your issue? I suspect you nailed it. The sticker says GLC-T, the idprom (or perhaps this is something IOS is generating based on some other properties of the GBIC) says "GE-T": Transceiver Type: = GE T (26) Of course it also claims the connector is an LC (or "LC."), which is beyond nonsensical: Connector type = LC. Vendor is supposed to be shipping something out to replace it, not sure what yet. I promise to follow-up for the archives when I've got something that works. Thanks, Charles > > On Tue, Apr 22, 2014 at 7:17 PM, CiscoNSP List > <cisconsp_l...@hotmail.com> wrote: >> >> Ive got some ASR1006's with SPA-5X1GE with NHR Gb copper SFP's that work >> fine....dont have any 1002-X's to test sorry. >> _______________________________________________ >> cisco-nsp mailing list cisco-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > -- > 09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0 _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2014.0.4355 / Virus Database: 3882/7378 - Release Date: 04/22/14 _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/