Hi All, it doesn't seem that the AC's going down cause a bgp reconvergence.
my test architecture is now, a single homed ce site off a asr9k (4.1.2) and a second site dual-homed ce off (2) me3600's (15.3(2)S2).... when i shutdown the (ac, attachment circuit) pe-ce port on the 3600-2 the traffic doesn't failover to 3600-1. the only way i can get it to failover is to completely remove the vfi context in 3600-2. then i see the 9k fire off a pw to 3600-1 and traffic starts to flow again to site 2. |----eng-lab-3600-1-----occam----- site2-pc2 | | | | | | site1-pc---eng-lab-9k-1----mplscloud----| occam----- site2-pc1 | | | | | | |----eng-lab-3600-2-----occam 3600-1 is 10.101.12.251 3600-2 is 10.101.12.250 *** before i delete vfi context from 3600-2.... RP/0/RSP0/CPU0:eng-lab-9k-1#sh bgp l2vpn vpl rd 64512:45 ... Network Next Hop Rcvd Label Local Label Route Distinguisher: 64512:45 (default for vrf v45:v45) *> 1:1/32 0.0.0.0 nolabel 16315 *>i2:1/32 10.101.12.250 18 nolabel * i 10.101.12.251 307 nolabel *** after i delete vfi context from 3600-2.... RP/0/RSP0/CPU0:eng-lab-9k-1#sh bgp l2vpn vpl rd 64512:45 Network Next Hop Rcvd Label Local Label Route Distinguisher: 64512:45 (default for vrf v45:v45) *> 1:1/32 0.0.0.0 nolabel 16315 *>i2:1/32 10.101.12.251 307 nolabel Aaron _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
