Looking at some potential edge redesign options when comparing 6880-X-XL [larger route table @ 2M IPv4] & ASR1004/1006 platforms. Thinking about leaving the edge routers to ASR's (could be more than 4 carriers - 1 per ASR) and then route-reflecting down to the new L3 core/distribution. Moving the L3 / HSRP from the ASR edge down to the 6880 level and disposing of HSRP. Thoughts? Current designs? Thinking VSS @ the 6880 level good choice/bad choice? Would like to you know your thoughts...
Mark NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information. Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
