Cisco found the bug. It is bug id: CSCuh43027. It effects 15.2 and some 15.3 code as well as the corresponding ASR code releases.
Mack McBride | Network Architect | ViaWest, Inc. O: 720.891.2502 | [email protected] | www.viawest.com | LinkedIn | Twitter | YouTube -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Mack McBride Sent: Wednesday, May 14, 2014 5:48 PM To: [email protected] Subject: [c-nsp] Stuck route issues on 7600 and ASR1000 Has anyone else seen stuck route issues on the 7600 and ASR 1000 platforms Running 15.3(1)S2 and 03.07.03.S(15.2(4)S3) respectively. It appears both platforms are affected in the same way. The route appears in a show ip route command as learned from BGP but the route does not appear in the BGP table. The only solutions are clear ip route <route> <mask> or the more Intrusive clear ip route *. clear ip bgp * does not work since the route has vanished from the global routing table. I am trying to get a feel for how wide spread this issue is. So far Cisco TAC has not been able to positively identify a bug that matches this. BGP withdrawals are getting received since the route is removed from the bgp rib but not getting forwarded to the device rib from the protocol rib. Routes adds and changes seem to be unaffected. Any feedback on this problem would be helpful. Mack McBride Sr. Network Architect _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
