On 29.05.2014 1:51 PM, M K wrote:
> route-policy CONNECTED
> if source in (192.168.200.0/24, 192.168.201.0/24) then
s/source/destination/
> pass
> endif
> end-policy
>
> RP/0/0/CPU0:XR2(config)#router ospf 1
> RP/0/0/CPU0:XR2(config-ospf)#redistribute connected route-policy CONNECTED
>
> Am getting the below error
>
> router ospf 1
> redistribute connected route-policy CONNECTED
> !!% Could not find entry in list: Policy [CONNECTED] uses the 'source'
> attribute. There is no 'source' attribute at the ospf redistribution attach
> point.
>
> I tried it using a prefix-set but the same issue
Use destination instead of source in the route-policy.
Should be the same as for filtering in BGP sessions.
Cheers,
Tim
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
