Sup2t is working on (implemented?) something along these lines.
On Wed, Jun 4, 2014 at 11:35 AM, Gert Doering <[email protected]> wrote: > Hi, > > On Wed, Jun 04, 2014 at 05:21:13PM +0100, Nick Hilliard wrote: > > On 04/06/2014 16:39, Antonio Soares wrote: > > > Usually it doesn't recover by itself > > > > there's no "usually" - this is an unrecoverable problem and the only > option > > is to reboot. > > That's what I used to think (it is not "unrecoverable", but Cisco decided > to not implement recovery[*]). OTOH on SXI "sh mls tcam ex" continued to > show "true" even after the overflow got fixed, while the OP's 15.1SY > went back to "false". > > So maybe someone actually fixed that one :-) > > [*] if you can program TCAM "from scratch" at bootup, I don't see why > you couldn't recover by clearing and reprogramming everything... yes, this > would hurt, but much less than a full reboot, or continuing to software- > forward. > > gert > > -- > USENET is *not* the non-clickable part of WWW! > // > www.muc.de/~gert/ > Gert Doering - Munich, Germany > [email protected] > fax: +49-89-35655025 > [email protected] > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
