Hello Pete, Two topics that could be added to the article:
- recommendations when receiving 1 full ipv4 + 1 full ipv6 BGP feeds - issues if using ebgp multipath Thanks. Regards, Antonio Soares, CCIE #18473 (RS/SP) [email protected] http://www.ccie18473.net -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Pete Lumbis Sent: segunda-feira, 9 de Junho de 2014 19:38 To: [email protected] Subject: [c-nsp] Sup720 (6k/7600) FIB_EXCEPTION_THRESHOLD warnings If you have a Sup720 pulling a full BGP feed you've probably seen error messages like this: *%MLSCEF-SP-4-FIB_EXCEPTION_THRESHOLD: Hardware CEF entry usage is at 95% capacity for IPv4 unicast protocol* A document was just published on Cisco.com describing the issue and how to correct it. http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-swit ches/117712-problemsolution-cat6500-00.html Regards, Pete _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
