neigh xxxxxx peer-as yyyy shutdown Problem solved.
On Fri, Jun 20, 2014 at 9:37 AM, Scott Granados <[email protected]> wrote: > So this is not a stupid question at all. I’ve wondered about this myself. I > suspect the reason your terminal slows is the CPU spikes when adding a new > neighbor and the session establishes. (I could be wrong that’s just a guess) > In my case I never had the slow down problem so I would cut and paste the > neighbor with AS and then the neighbor with shut, then apply the peer group / > description etc and then no shut when the peer is configured. XR I believe > has a commit command similar to the way Juniper does it. In the JunOS case > you build out your peer and all he details then commit to make the changes > live. I worked on a CRS that had a similar setup. I’m with you I suspect > there’s a better fix for this but I don’t know off hand. The cut and paste > method is what I always used. > > Thanks > Scott > > On Jun 20, 2014, at 10:39 AM, Lukas Tribus <[email protected]> wrote: > >> Hey guys, >> >> >> I feel like this is a stupid question with a simple solution, but I just >> not see it: >> >> When I configure a new BGP session, before I can shutdown the neighbor >> or apply a specific peer-group/session-template/policy-template, I need >> to configure the remote-as, so the first command in the address-family is: >> >> neighbor 2001::123 remote-as 65005 >> >> >> Now, if I don't specify the policies right away, or shutdown the session >> right away (or the ssh terminal slows down for whatever reason), IOS will >> establish the BGP session as-is (without any policies), until I manage >> to configure the rest. >> >> In that case, I'm leaking everything I have to the other side for a short >> period of time, possibly triggering max-prefix limits or causing other >> nastiness. >> >> Especially when using SSH and configuring long IPv6 addresses on IOS-XE >> here, this seams to be a problem, copy'n'pasting from notepad is not >> enough in that situation (somehow, the terminal slows down when pasting >> the config to some 2 - 3 chars per second). >> >> >> Any way to make IOS(-XE) behave in a more sane way so I can configure >> everything *before* the session brought up? Like defaulting to shutdown >> or something like that? >> >> >> Let me know how you guys avoid this problem. >> >> >> >> Thanks! >> >> Lukas >> >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ -- "Genius might be described as a supreme capacity for getting its possessors into trouble of all kinds." -- Samuel Butler _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
