You can use an ACL to let IOS know which addresses to translate. So an ACL which reads ANY to 172.16.144.0/20 - Then source NAT to the interface
Thanks Darren http://www.mellowd.co.uk/ccie > Date: Tue, 1 Jul 2014 14:48:26 -0700 > From: [email protected] > To: [email protected] > Subject: [c-nsp] Cisco IP nat question > > > I have a 7201 connected to network 172.16.144.0/20, and it's interface > is 172.16.144.1 (gi0/1.9999 for example). I was wondering how I might > arrange things so that any source address -> inbound to 172.16.144.0/20 > is natted with a source address of 172.16.144.1? The clients are dumb > and default route doesn't work for them (they have multiple and can't > pick the right one), so sourcing all traffic FROM 172.16.144.1 would let > me talk to them all. I do not care about the other direction, just inbound. > > Thank you. > > Mike- > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
