Hi, MSTP switches work in a region if they have similar hash values for the region. Make sure to have identical VLAN mapping on each switches that are to be placed in the same region.
You may also verify the root bridge status. If these switches are working independently, go through the VLAN mappings. HTH Regards, Hari CCIE#38346 On Tue, Jul 15, 2014 at 8:19 PM, thiyagarajan b <[email protected]> wrote: > Hello, > Anybody running MSTP between Cisco and Huawei 5700 switches? I am running > it and facing issues. I am finding Boundary ports in cisco switches, even > if same region configuration is compiled in both cisco and huawei. Have > applied 'stp config-digest-snoop' command in huawei end. Any suggestions? > > Warm regards, > Thiyagarajan B. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
