Hi All, I've not used the local switching feature on a 7600 before but I have a need to use it now. It seems fairly strait forward and I've had a read through this page, http://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/fslocal.html#wp1132065
I have configure the following command; connect TEST-CONNECT TenGigabitEthernet2/1.104 GigabitEthernet1/18 interworking ethernet PE251#show connection all ID Name Segment 1 Segment 2 State ================================================== 3 TEST-CONNECT Te2/1.104 Gi1/18 UP Te2/1.104 is facing an ASR9K dumping an MPLS pseudowire onto a sub-interface on VLAN 104. I need to get that pseudowire to the device on Gi1/18 :) I can see with "show int te2/1.104" the incoming packet count is incrementing (I'm sending a continuous ping over the pseudowire) but the output packet count on gi1/18 isn't. I've never used this local switching feature before, would could be wrong here? Cheers, James. PE251#show module Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 1 48 CEF720 48 port 1000mb SFP WS-X6748-SFP SAL17120ZTX 2 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE SAL17194DS5 5 5 Route Switch Processor 720 10GE (Activ RSP720-3CXL-10GE SAL1708ZMCF Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ----- ------------- ------------ ------- 1 b0fa.eb83.0e00 to b0fa.eb83.0e2f 3.0 12.2(18r)S 15.3(1)S Ok 2 10f3.11b9.0300 to 10f3.11b9.0303 3.3 12.2(14r)S 15.3(1)S Ok 5 5057.a8b9.a1ec to 5057.a8b9.a1f3 1.2 12.2(33r)SR 15.3(1)S Ok Mod Sub-Module Model Serial Hw Status ---- --------------------------- ------------------ ----------- ------- ------- 1 Distributed Forwarding Card WS-F6700-DFC3CXL SAL17194M08 1.8 Ok 2 Distributed Forwarding Card WS-F6700-DFC3CXL SAL17142553 1.8 Ok 5 Policy Feature Card 3 7600-PFC3CXL-10GE SAL17194DRD 1.3 Ok 5 C7600 MSFC4 Daughterboard 7600-MSFC4 SAL17194BVW 7.0 Ok Mod Online Diag Status ---- ------------------- 1 Pass 2 Pass 5 Pass PE251#show ver | i 76 Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 15.3(1)S2, RELEASE SOFTWARE (fc2) BOOTLDR: Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 15.3(1)S2, RELEASE SOFTWARE (fc2) System image file is "sup-bootdisk:c7600rsp72043-advipservicesk9-mz.153-1.S2.bin" Cisco CISCO7606-S (M8500) processor (revision 2.0) with 1900544K/131072K bytes of memory. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
