Are you using any ACL filtering on the VLAN if so is udp port 1985 permitted ?
Jey S. Network Engineer CCIE #41608 Sent from my iPhone > On 2 Aug 2014, at 11:48, Gert Doering <[email protected]> wrote: > > Hi, > >> On Fri, Aug 01, 2014 at 04:16:04PM -0400, Randy wrote: >> PRIMARY ROUTER VLAN X: >> standby version 2 >> standby 0 ip x.x.x.x >> standby 0 priority 150 >> standby 0 preempt delay minimum 600 > > This is what we use, and it used to work fine. > > Test it... "debug standby terse" and then shu/noshu one of the VLAN > interfaces... and if it doesn't work, yell at TAC. > > (Insert rant about the general silliness of "standby version 2" here, > maybe it's just broken in v2...) > > gert > -- > USENET is *not* the non-clickable part of WWW! > //www.muc.de/~gert/ > Gert Doering - Munich, Germany [email protected] > fax: +49-89-35655025 [email protected] > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
