Thanks Adam for your suggestion, It takes lot of setup change for implementing MPLS in ME so I would rather go for RPR for now. But I am finding only Cisco 10700 series supports RPR when I refer to the cisco feature navigator.
Warm Regards, Thiyagarajan B. On Sat, Aug 2, 2014 at 1:58 PM, Vitkovský Adam <[email protected]> wrote: > Hi, > Sure 802.17 RPR is meant to supersede the STP for loop avoidance, faster > convergence and better BW efficiency. > However in order to deploy it all nodes in the ring have to support it. > All ME series switches should support it. > Though I'd recommend upgrading the kit to MPLS capable ME switches and to > use rLFA to achieve sub 50ms convergence. > > > adam > > -----Original Message----- > > From: cisco-nsp [mailto:[email protected]] On Behalf Of > > thiyagarajan b > > Sent: Friday, August 01, 2014 3:07 PM > > To: [email protected] > > Subject: [c-nsp] RPR in MetroE > > > > Hi, > > > > Can Resilient Packet Ring can be used in Metro Ethernet (L2) for loop > > avoidance instead of MSTP? > > > > Warm Regards, > > Thiyagarajan B. > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
