Hi Ali, Could you send us the output of the "show platform". I would like to check the version of your line card. Thanks
Patrick 2014-08-04 7:40 GMT+02:00 Ali Sumsam <[email protected]>: > Hi All, > > I have bought a new CiscoASR1001. Just configured it as a PPPoE server with > simplest configuration. My PPPoE client connects successfully, gets > authenticated and gets the IP address. But packet are not forwarded if I > try to ping internet or even the ASR from the PPPoE client. > > > The same configuration works fine on a Cisco IOS router, If I make it a > PPPoE server. > > Do I need to enable something on my ASR1001? or am I using a wrong IOS > version? > > > Source of my configuration is > > http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/bbdsl/configuration/xe-3s/asr1000/bba-xe-3s-asr1000-book/bba-pppoe-client-xe.html#GUID-91AF32F2-662D-4EF8-99DD-37C021637AE7 > > > Device> *enable* > Device# *configure terminal* > Device(config)# *interface GigabitEthernet 0/0/0* > Device(config-if)# *no ip address* > Device(config-if)# *pppoe enable* > Device(config-if)# *pppoe-client dial-pool-number 1* > Device(config-if)# *no shutdown* > Device(config-if)# *exit* > Device(config)# *interface dialer 1* > Device(config-if)# *mtu 1492* > Device(config-if)# *ip address negotiated* > Device(config-if)# *encapsulation ppp* > Device(config-if)# *dialer pool 1* > Device(config-if)# *ppp pap sent-username username1 password password1* > Device(config-if)# *end* > > Example: Configuring PPPoE on IPv4 > > Example: Server Configuration > > Device> *enable* > Device# *configure terminal* > Device# *username username1 password password1* > Device(config)# *bba-group pppoe bba1* > Device(config-bba-group)# *virtual-template 1* > Device(config-bba-group)# *exit* > Device(config)# *interface loopback 1* > Device(config-if)# *ip address 192.2.0.2 255.255.255.0* > Device(config-if)# *exit* > Device(config)# *interface GigabitEthernet 0/0/0* > Device(config-if)# *no ip address* > Device(config-if)# *negotiation auto* > Device(config-if)# *pppoe enable group bba1* > Device(config-if)# *no shutdown* > Device(config-if)# *exit* > Device(config)# *interface virtual-template 1* > Device(config-if)# *description pppoe bba1* > Device(config-if)# *mtu 1492* > Device(config-if)# *ip unnumbered loopback 1* > Device(config-if)# *peer default ip address pool pool1* > Device(config-if)# *ppp authentication pap* > Device(config-if)# *exit* > Device(config)# *ip local pool pool1 192.2.0.1 192.2.0.10* > Device(config)# *end* > > > > #show version > Cisco IOS XE Software, Version 03.11.00.S - Standard Support Release > Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), > Version 15.4(1)S, RELEASE SOFTWARE (fc2) > > > ROM: IOS-XE ROMMON > > System image file is > "bootflash:/asr1001-universalk9.03.11.00.S.154-1.S-std.bin" > Last reload reason: Reload Command > > > License Level: ipbase > License Type: Default. No valid license found. > Next reload license Level: ipbase > > cisco ASR1001 (1RU) processor with 6848982K/6147K bytes of memory. > Processor board ID SSI181608S5 > 4 Gigabit Ethernet interfaces > 32768K bytes of non-volatile configuration memory. > 16777216K bytes of physical memory. > 7741439K bytes of eUSB flash at bootflash:. > 999424K bytes of USB flash at usb0:. > > Configuration register is 0x2102 > > > > Regards, > > *Ali Sumsam - *eintellego Networks Pty Ltd > Senior Network Engineer > [email protected] ; www.eintellegonetworks.com > > Phone: 1300 239 038; Cell +61 (0)450 609 592 ; skype://sumsam.ali80 > > facebook.com/eintellegonetworks ; <http://twitter.com/networkceoau> > linkedin.com/in/alisumsam > > > The Experts Who The Experts Call > Juniper - Cisco - Cloud > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
