Jure, Can you get the output of "sh bfd neighbors detail" 3 times in succession? Also, dump "sh platform ho-fpga tx-buffer-table de 1" (will need service internal). Please do unicast the logs to me.
Thanks, Ramji Vasudevan Manager, SW Development Service Provider Access Group (SPAG) [email protected] -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Waris Sagheer (waris) Sent: Wednesday, August 27, 2014 5:38 AM To: jure brkljacic; Jon Harald Bovre Cc: [email protected] Subject: Re: [c-nsp] ME3600 BFD flapping Jure, Do you have a class in your policy to classify prec 6 and 7 traffic and allocate 5% of bandwidth? Best Regards, [http://www.cisco.com/web/europe/images/email/signature/horizontal06.jpg] Waris Sagheer Technical Marketing Manager Service Provider Access Group (SPAG) [email protected]<mailto:[email protected]> Phone: +1 408 853 6682 Mobile: +1 408 835 1389 CCIE - 19901 <http://www.cisco.com/> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message. For corporate legal information go to:http://www.cisco.com/web/about/doing_business/legal/cri/index.html From: jure brkljacic <[email protected]<mailto:[email protected]>> Date: Tuesday, August 26, 2014 at 6:29 AM To: Jon Harald Bovre <[email protected]<mailto:[email protected]>> Cc: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [c-nsp] ME3600 BFD flapping Hi, We have BDF sessions enabled on VLAN (SVI interfaces) and no ip redirects command is configured Br Jure On Tue, Aug 26, 2014 at 3:21 PM, Jon Harald Bovre <[email protected]<mailto:[email protected]>> wrote: We have seen missing 'no ip redirects' on the interface to cause problems. In addition to too agressive timers om radio and serial links. Jon Harald Bøvre ------------------------------ Fra: jure brkljacic <[email protected]<mailto:[email protected]>> Sendt: 26.08.2014 14:03 Til: [email protected]<mailto:[email protected]> Emne: [c-nsp] ME3600 BFD flapping Hi, We have a huge problems with BFD flapping on ME3600.It`s random event on two 3600 connected to the "same" end system. a.) First we thought that interface output drops causing BFD flapping.Than we configure a a output queue policy to eliminate interface output drops. BFD flapping still there :( Code running:me360x-universalk9-mz.153-3.S3 Number of BFD sessions: ~35 timers:150 multiplier 3 CPU:~10% Any help will be greatly appreciated. _______________________________________________ cisco-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
