If you have the old 25 pin mod tap that comes with the console cables you can use that which converts you to RJ45 and then you can use your normal 9 pin on the other end. Else you need a regular null modem type cable which are readily available. As someone else mentioned, if you’re using a G1 or G2 there should be an RJ45 console port as well.
On Aug 27, 2014, at 6:27 AM, Mohammad Khalil <[email protected]> wrote: > Hi all > I have old Cisco VXR I need to access with console , but it's not RJ45 > console , it's like the computer ports > is there a specific cable to use? > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
