Hi all, I am having trouble with getting a session to use a local ip pool.
I am sending the following avpairs to the session from Radius: lcp:allow-subinterface=yes ip:vrf-id=TESTVRF ip:addr-pool=TESTPOOL ip:ip-unnumbered=Loopback212 On the router: ip local pool TESTPOOL 100.64.8.1 100.64.15.254 The attributes are being received in the debug, and the session is ending up in the correct VRF, but there is no IP address being assigned on the local LNS. Router#show users ... Interface User Mode Idle Peer Address Vi2.1 [email protected] PPPoE - Router#show vrf ... Name Default RD Protocols Interfaces TESTVRF 65000:305 ipv4 Lo305 Vi2.1 ... Any help to figure out what is going on would be very much appreciated. Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(1)S, RELEASE SOFTWARE (fc2) ...Skeeve *Skeeve Stevens - *eintellego Networks Pty Ltd [email protected] ; www.eintellegonetworks.com Phone: 1300 239 038; Cell +61 (0)414 753 383 ; skype://skeeve facebook.com/eintellegonetworks ; <http://twitter.com/networkceoau> linkedin.com/in/skeeve twitter.com/theispguy ; blog: www.theispguy.com The Experts Who The Experts Call Juniper - Cisco - Cloud - Consulting - IPv4 Brokering _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
