Hi, > I have a trunk with 4 interfaces what is the quickest way to remove ONE > interface from the Port channel?, is the command Default interface gi x/y/z > adequate?. > Thanks in advance. A colleague of mine removed an interface recently from a > port channel and the interface retained the information that was applied by > being a member of the port channel this caused a loop. Don't want to repeat > this.
remove the channel-group component on the interface itself - however, is it still linked physically and does the other end still have it as part of the port channel? safest method involves shutting down the interface at each end , making changes, then unshutting (ensuring the physical linkage is how you want it first!) alan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
