Thaks,
It works very well with ES ports.But 3750 switches that i am using have only 2 
ES pots. which cisco switches models could have more than 2 (about 6) ES ports 
? because i need more MPLS interfaces. 

Regards. 

Thucydide TAJOUO 

     Le Mercredi 24 septembre 2014 13h22, thucydide tajouo <[email protected]> a 
écrit :
   

 Thaks,
It works very well with ES ports.But 3750 switches that i am using have only 2 
ES pots. which cisco switches models could have more than 2 (about 6) ES ports 
because i need more MPLS interfaces. 

Regards.


Thucydide TAJOUO 

     Le Samedi 13 septembre 2014 13h44, thucydide tajouo <[email protected]> a 
écrit :
   

 Thanks,
I will try with ES ports and come back.Note that when doing a traceroute from 
one provider edge to customer edge connected to another provider edge, labels 
are displayed. isn't because mpls is enabled ?
in the following document, 

http://www.cisco.com/c/en/us/td/docs/switches/metro/catalyst3750m/software/release/12-2_58_se/configuration/guide/3750metro_scg/swmpls.html

it's said that :>Valid ES interfaces include gigabitethernet1/1/1, 
gigabitethernet1/1/2, and VLANs.(section "Enabling MPLS", step 7)
Regards, 


Thucydide TAJOUO 

     Le Vendredi 12 septembre 2014 16h28, thucydide tajouo <[email protected]> a 
écrit :
   

 Thanks for your response.
See in attach configurations files and show mpls forwarding-table output.
Regards
 

Thucydide TAJOUO 

     Le Vendredi 12 septembre 2014 14h49, Mikael Abrahamsson <[email protected]> 
a écrit :
   

 On Fri, 12 Sep 2014, thucydide tajouo wrote:

> I said : "Note that between PE and LSR, we use VLANs interface (because MPLS 
> cannot be enable on physical interfaces)." because of what you can see on the 
> image in attach according to this 
>
> http://www.cisco.com/c/en/us/td/docs/switches/metro/catalyst3750m/software/release/12-2_55_se/configuration/guide/3750metro_scg/swmpls.html#wp1182634
>
> until now, i realize that when  MPLS is disabled on MPLS cloud interfaces, i 
> can ping from one customer from another but when i enable it again, ping 
> cannot pass.

I don't understand your terminology. "cloud interface"? "VLANs interface"?

Please post config.

-- 
Mikael Abrahamsson    email: [email protected]


    

    

    

   
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to