As long as there is only one interface that is up with the IP address, Cisco should NOT complain about the duplicate IP.
On Thu, Sep 25, 2014 at 10:19 AM, Randy <[email protected]> wrote: > I'm tasked with moving a BGP session on a 6500 from a 1GE to a 10GE > interface (live environment). BGP session details are staying the same. > The BGP peer IPs (both v4 and v6) are assigned directly to the existing 1GE > interface (no SVI, ect). > > Is it as simple/possible as configure the new interface with the same IP's > but in a shutdown state, move the x-connect, shut the old interface and > unshut the new interface? Or will IOS block me from doing this (two > interfaces with the same IP) -- in other words, the IPs will need to be > removed from the old interface first? > > Thanks for any advise or tips on keeping downtime / CLI work to a minimum > :) > > -- > ~Randy > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
