Hi All, For reasons way beyond the scope of this mailing list (crazy sales people, insane customers, ridiculous marketing, promises of gold, the usual techies nightmare) I'm trying to lab up a hub and spoke L2 VPN scenario using L2TPv3.
CPEs are ISR G2s such as 1941 and the PE/Hub is an ME3600. I'm not having much luck so I wondered if I'm chasing a ghost; Has anyone used L2TPv3 xconnects (due to lack of MPLS) into a VFI on an ME3600 to get this scenario to work? Perhaps you used something else that worked? Or do you think this simply can't be done? When mixing L2TPv3 with VFIs, is the logic present to do things like MAC learning, I've never tried this without MPLS and/or BGP. Something like; pseudowire-class l2tpv3-class encapsulation l2tpv3 interworking ethernet ip local interface looopback 0 l2 vfi TEST manual vpn id 100 bridge-domain 200 neighbor 1.1.1.1 pw-class l2tpv3-class neighbor 2.2.2.2 pw-class l2tpv3-class int gi0/2 switchport mode trunk switchport trunk allow vlan none service instance 200 ethernet uncapsulation untagged bridge-domain 200 int vlan200 no ip address Cheers, James. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
