Hi Darwin, This is where the mef-cecp would get handy as I'm not 100% sure what you mean by e-tree. But this is what you can do:
interface gi0/0 service instance 123 ethernet description Link to E-Tree root encap dot1q 10 ethernet rewrite ingress tag pop 1 symmetric bridge-domain 123 l2 vfi E-Tree vpn id 1 bridge-domain 123 neighbor x.x.x.x 100 encapsulation mpls neighbor y.y.y.y 200 encapsulation mpls You can also associate VLAN interface with this setup to have a L3 interface. adam > -----Original Message----- > From: cisco-nsp [mailto:[email protected]] On Behalf Of > Darwin L. > Sent: Friday, October 10, 2014 1:59 AM > To: [email protected] > Subject: [c-nsp] Me3800 EVC E-tree > > Hi Guys, > > Anybody know how I can do a configuration rooted to multipoint (e-tree) on > L2 in the Cisco me3800 using iOS 15.3. > > Thanks in advance. > > << Darwin Santana >> > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
