As long as you can configure AToM xconnect you should be good. You may want to encourage them to use Ethernet instead for the lower per bit cost of that interface.
Jared Mauch > On Oct 15, 2014, at 6:17 AM, Artem Viklenko <[email protected]> wrote: > > Hi! > > Sorry for may be very stupid question. But googling does not > helps so far. > > I've got a request from customer for SDH channel between > two cities. At both locations we have cisco 7600's and > MPLS network already deployed and works fine. > > At both sides we have SIP-400 and SPA-2XOC3-POS adapters. > (Last time i use them 5 years ago and actually already > forgotten many things about SONET/SDH.) > > In general, is it enougth to build xconnect beteween two POS interfaces > to solve this task or we need another SPAs - SPA-1XOC3-CE for this? > > > Thanks in advance! > > > > -- > Sincerely yours, > Artem Viklenko. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
