I think I encountered the same problem a lond time ago and didn't find
any solution. Possible burst size on some switches are too small to
support high bit rates that causes losses far before target rate is
achived. As workaroung I can advise only select another device for
policing.
--
Andrey
Ahsan Rasheed писал 05.11.2014 19:17:
Hello All,
Can any one help me on this issue. I would be thanksfull.
Thanks & Regards,
Ahsan Rasheed
On Tue, Nov 4, 2014 at 2:00 AM, Ahsan Rasheed
<[email protected]>
wrote:
Hi All,
what would be the normal burst size in policer on 3550 cisco switch
for
500 Mbps.
what normal burst size i should use although it does support with
max 2000000
Switch#police 500000000 ?
<8000-2000000> Normal burst bytes
#show policy-map
Policy Map 500Mbps_OUT
Class ALL_OUT
police 500000000 62500 exceed-action drop
I am using below IOS image
System image file is "flash:c3550-ipservicesk9-mz.122-25.SEB4.bin"
Can i use any other IOS to support more normal burst size.
Thanks & Regards,
Ahsan Rasheed
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
