Answered my own question: RTR-11# sh system internal forwarding vrf V107 ipv6 route module 7
Hardware IPv6 FIB entries for table V107/base 0::/127, Index: 0x10000 Dev: 1 Adj Index: 0xa002, Lif Base: 0, Egress Lif: 0x0 fe80::/10, Index: 0x81e2c Dev: 1 Adj Index: 0x88200, Lif Base: 0, Egress Lif: 0x1ff81 ff00::/8, Index: 0x811fe Dev: 1 Adj Index: 0xa002, Lif Base: 0, Egress Lif: 0x0 ... Please ignore me! On Tue, Nov 18, 2014 at 1:08 PM, Tim Durack <[email protected]> wrote: > Anyone know how to translate vrf into ipv6 table on an N7K? > > RTR-1# show system internal forwarding table 0x0b ipv4 route module 7 > > Routes for table V107/base > > ----+---------------------+----------+----------+------+----------- > Dev | Prefix | PfxIndex | AdjIndex | LIFB | LIF > ----+---------------------+----------+----------+------+----------- > 1 0.0.0.0/32 0x0 0xa001 0 0x0 > 1 127.0.0.0/8 0x812fe 0xa001 0 0x0 > 1 255.255.255.255/32 0x1fe 0x80200 0 0x1ff81 > 1 10.1.0.1/32 0xf102 0xb021 0 0x4023 > 1 10.1.0.2/32 0x1ae40 0xb020 0 0x4023 > 1 10.1.0.3/32 0x3e282 0xb008 0 0x4023 > 1 10.1.0.140/32 0x2ee82 0xb009 0 0x4023 > 1 10.1.0.141/32 0x3e784 0xb00a 0 0x4023 > 1 10.1.0.142/32 0x2ef82 0xb00b 0 0x4023 > 1 10.1.0.143/32 0x3e7a4 0xb00c 0 0x4023 > 1 10.1.0.144/32 0x2e803 0xb00d 0 0x4023 > 1 10.1.0.145/32 0x1aa84 0xb00e 0 0x4023 > 1 10.1.0.146/32 0x3c102 0xb00f 0 0x4023 > 1 10.1.0.220/32 0x3e342 0xb010 0 0x4023 > 1 10.1.0.221/32 0xf103 0xb015 0 0x4023 > 1 10.1.0.222/32 0x1ab25 0xb01a 0 0x4023 > 1 10.1.0.223/32 0x2e9c3 0xb01d 0 0x4023 > 1 10.1.2.0/24 0x3de23 0xb021 0 0x4023 > 1 10.1.3.0/24 0xf113 0xb021 0 0x4023 > > > RTR-1# show system internal forwarding table 0x0b ipv6 route module 7 > ERROR: Invalid ipv6 table id > > Thanks, > > -- > Tim:> > -- Tim:> _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
