A soft reset will do the trick. The issue is you need to reprocess the routes based on your new route-map but you don’t have to completely clear the session. Route refresh will take care of this so a clear soft should do the trick.
On Dec 2, 2014, at 9:01 PM, CiscoNSP List <[email protected]> wrote: > Hi Everyone, > > If you want to set your own community tags to an upstreams routes that you > receive(nei route map in), is a hard reset of BGP required for the > communities to be set? (Ive just updated a route-map with my community tags > for a given upstream, but there community tags are still assigned to all > routes received from them....so Im guessing a hard reset of BGP session to > them is required....as "soft" reconf didnt change the community tags?) > > Cheers. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
