Hi All, We take wholesale ADSL from multiple provides but also are an LLU provider with on-net ADSL.
I'm trying to configure up an LAC in our lab but not getting anywhere... I have seen an old post here where a guy wants to set up an LAC but its pretty strait forward, just forwarding tunnels on to an LNS: http://www.gossamer-threads.com/lists/cisco/bba/82134 I am trying in the lab to create a LAC config that will query our RADIUS for PPP authentication because the RADIUS will return different tunnel end points based on the user authenticating in. With the RADIUS responses to our wholesale providers [email protected] will prefer LNS1 and [email protected] will prefer LNS2. I wish to re-create this internally. All config examples and guides I can find on the internet are for creating static VPDN groups that initiate a tunnel to 1.2.3.4 for uses that mactch domain customer1.net. I would have to create a VPDN group for every domain. Does Cisco IOS not support more typical wholesale LAC features operting on the output of RADIUS and also supporting the concept of query RADIUS IP 1.1.1.1 for all @domain1.net user and query RADIUS 2.2.2.2 for all @domain2.net user queries? I am labbing this with 7200 series routers running c7200-advipservicesk9-mz.152-4.M7.bin. We also have ASRs but I was hoping to stick to these very well known platforms first then try the ASRs. Cheers, James. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
