Hi allI have the below topologyCE1 -- PE1 -- P -- PE2 -- CE2RIPv2 is the PE-CE
routing protocol
Now , I have configured two VRFs , one for each customer They are unable to
communicate due to the route-target import values on both endsWhen I add the
import value to each PE , they are able to communicateNow , what am trying to
do is allowing one side to add the import value and allow one way communication
, is that doable?I know the source IP address is not reachable as the import
value are not allowing the update
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
