no proxy arp on your router has nothing to do with it, the proxy arp is done by the redback, you have to make sure that your route is not pointing to the bvi without next hop, and that there is a right default route from dhcp.
Is there any configured static route in the configuration like "ip route 0.0.0.0 0.0.0.0 bvi1"? I don't have the exact command in mind, but there is a command at "show ip dhcp" or "show dhcp" where you can see what settings you got from the provider dhcp server. Am Freitag, 12. Dezember 2014, 13:34:00 schrieb chris: I added "no ip proxy-arp" under BVI1 and rebooted the router to clear all the entries in the arp table and right away as soon as the circuit came up and i logged in I'm still seeing the same random MAC's and alot of them even though its only up a few minutes. To keep email from getting too long I've posted debug info here: http://pastebin.com/AxMB3mw8[1] On Fri, Dec 12, 2014 at 11:29 AM, Karsten Thomann <[email protected][2]> wrote: Hi Chris Is there any configured default route on the router?Is it possible to post output of sh ip route?This looks like a default route without next hop ip and proxy arp at the provider... Kind regardsKarsten Gesendet von meinem BlackBerry Originalnachricht Von: chrisGesendet: Freitag, 12. Dezember 2014 17:21An: cisco-nsp@pu ck.nether.net[3] _______________________________________________cisco-nsp mailing list cisco- [email protected][4] https://puck.nether.net/mailman/listinfo/cisco-nsp[5] http://puck.nether.net/pipermail/cisco-nsp/[6] -------- [1] http://pastebin.com/AxMB3mw8 [2] mailto:[email protected] [3] http://ck.nether.net [4] mailto:[email protected] [5] https://puck.nether.net/mailman/listinfo/cisco-nsp [6] http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
