On Saturday, December 20, 2014, Devon True <[email protected]> wrote: > Hi Cisco-NSP, > > We have a pair of Cisco Nexus 7000s switches connecting into one Juniper > EX4200 switch using a vPC port-channel. On the Juniper side they are using > LACP Link Protection ( > http://www.juniper.net/techpubs/en_US/junos13.3/topics/task/configuration/lacp-link-protection-cli.html > < > http://www.juniper.net/techpubs/en_US/junos13.3/topics/task/configuration/lacp-link-protection-cli.html>). > In the initial turn-up, it was determined that the Cisco side was sending > packets across either interface, but the Juniper side would drop any > packets sent to the “protected” port on their side. > > Has anyone successfully configured the same setup on the Cisco side? We > opened a TAC case but they said it was not possible.
The LACP and link protection on EX are not mutual requirements, tell them to delete the link-protection statement. If they really do want just failover then the equivalent cisco side is bundle maximum-active along with port-priority. > Thanks! > > — > Devon > _______________________________________________ > cisco-nsp mailing list [email protected] <javascript:;> > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ -- "Genius might be described as a supreme capacity for getting its possessors into trouble of all kinds." -- Samuel Butler _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
