Hi Gert, I was not sure if I heard well in a webinar that L2 traffic should still pass through (maybe using also VSL port-channel link), do you have a reference on cisco.com about the behaviour you described ?
Thanks in advance > Date: Thu, 8 Jan 2015 12:00:59 +0100 > From: [email protected] > To: [email protected] > CC: [email protected] > Subject: Re: [c-nsp] VSS failover question > > Hi, > > On Thu, Jan 08, 2015 at 10:37:16AM +0000, R LAS wrote: > > In a VSS scenario with single SUP-2T on each > > Catalyst member, what happens to L2 traffic passing through Active member if > > its SUP-2T fails ? > > Well, the answer should be fairly obvious - "it will need to fail over > to the other box". > > In a single-SUP-setup, the box will just be dead if its SUP fails, so > not that many other options available. > > gert > > -- > USENET is *not* the non-clickable part of WWW! > //www.muc.de/~gert/ > Gert Doering - Munich, Germany [email protected] > fax: +49-89-35655025 [email protected] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
