someone offlist pointed me at the memory failure issue that cisco has seen triggered by power cycling. i have swapped in some older ram and the npe came up. i have pulled the i/o card and so far i am not seeing any voltage warnings. i'm letting the unit idle over the weekend to see if the voltage nonsense starts back up again.
i love coincident issues. On 2015-01-09 15:50, Joe Pruett wrote: > my 7206vxr with npe-g1 started whining about voltage levels today. i > didn't want to have it fail over the weekend so i did a full power > down/up and it didn't come up at all. started swapping parts around and > if i slap in an old npe-400, it boots but still whines about voltage. > swap the i/o card from one with the single 100mb port to one with just > console and now it isn't whining anymore. > > is it likely that something blew the npe-g1 and i/o card? or could i > have a backplane problem? i have dual power supplies and it doesn't seem > to matter what combo of those i use. i think i even tried another supply. > > what gremlins am i dealing with? > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
