Thank you very much. Sent from my iPhone
On Jan 10, 2015, at 12:14 AM, Wouter Prins <[email protected]> wrote: > Hi Matthew, > > this is listed in the Q&A: > > Q. What are the license requirements for a Cisco Catalyst 3650 switch stack? > A. In a Cisco Catalyst 3650 stack, all switches should be at the same > image-based license (IP Services/IP Base/LAN Base) level. The active switch > license level is considered as the reference, and the member switch licenses > are compared against it. If there is a mismatch, the active switch with the > syslog message “license mismatch error” indicates that the stacking was > unsuccessful. > Q. How is a “license mismatch error” fixed in a Cisco Catalyst 3650 stack? > A. The license level of the mismatched stack member switch can be changed > with the license right-to-use activate <license> all acceptEULA CLI command > (entire stack should have the same wired license level) and reloaded from the > active switch console. This will enable the member switch to join the stack > successfully. The customer has to purchase a license before moving to a > specific license level. > > http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3650-series-switches/qa_c67-729531.html > > On 10 January 2015 at 05:43, Matthew Laughlin <[email protected]> wrote: > Do I need a feature set license per stack or per stack member? > > Regards, > Matt Laughlin > > Sent from my iPhone > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > -- > Wouter Prins > [email protected] > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
