>Hi Everyone,
>
>I have a vrf (TEST), configured on 2 PE's...both learn each others
>connected+static routes (redist connnected, redist static), so that
>portion is working fine...but I also have leaked the default route from
>PE_A (That we receive from an upstream provider), into the vrf
>TEST....on PE_A, I can see the detault route in the VRF TEST, and also
>GRT, and I can get to the Internet from an IP within the VRF....I have
>"default-information originate" on PE_A for vrf TEST, but the default
>route is not being propagated to PE_B...the default route is seen as type
>"BGP" when I issue "sh ip route vr TEST/sh ip route vrf test
>0.0.0.0"....any suggestions on what is needed to redist this BGP route to
>the other PE in the VRF? i.e. under address family vrf TEST,
>redistribute BGP xxx (with a route map to ensure only the default is
>distributed to the other PE?)
A PE which imports a route into a VRF (and importing from global is no
exception) will not advertise this route via iBGP to other PEs. So you
would need to configure the same import on PE_B too..
oli
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
