Dear colleagues, I have an ASR9001-S with IOS XR 5.1.3. I have configured the router to send the log messages to a syslog server with the following configuration:
logging trap debugging logging buffered debugging logging 10.2.32.254 vrf MGMT severity debugging logging source-interface Lo20 vrf MGMT interface Loopback20 description Mgmt in-band vrf MGMT ipv4 address 10.2.33.129 255.255.255.255 The router has ping with the syslog server and the server firewall permit the packets. I have put a tcpdump sniffing packets but I don't see any syslog packet. Are there missing commands that I have to configure? Is it a bug? I have the same problem with the configuration backup. I have configured: configuration commit auto-save filename tftp://10.2.32.254/config.cfg tftp client vrf MGMT source-interface Loopback20 Best regards, Jordi _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
