Victor, >From last time remember when we do changes on C3560X and any previous models it involves to change "system mtu" command, and new setting only apply after reboot (ASIC re-init)
On 24.01.2015 13:17, Victor Sudakov wrote: > Colleagues, > > I have a network of about twenty C3560X switches switching IP-only traffic. > > Soon we will be enabling MPLS on some routers connected to this > network, so the switches will have to handle frames with the MTU > larger than the default 1500 bytes. > > How do I configure the switches to pass frames with MTU=1600, if > possible, without disrupting the service? > > I will be grateful for a link to some good howto. > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
