On Wednesday, January 28, 2015, Mark Tinka <mark.ti...@seacom.mu> wrote:
> > On 28/1/15 22:29, Tim Durack wrote: > >> C6880-X supports 10/100/1G/10G/40G on all ports. However, it does not >> allow >> you to configure auto-10-100, auto-1000, or disabled auto-neg and >> lock/speed duplex. Seems like a curious omission. >> > > Is this with a copper SFP? Copper and fiber. > >> Following the standards for GigE and beyond, we run auto on our >> facilities, >> but we still run into "carriers" stuck in the 90s. This could be a pain. >> > > We standardize on auto-neg for all customers and peers. > > I used to have issues at $previous_job back in 2009, but since then (and > at $current_job), we haven't come across any customers that weren't able to > support auto-neg. > > Of course, this is one of those things where with enough customers > on-board, you're bound to end up having to hard-code settings. > > Our 6880's are run as core switches - so only 10Gbps and a small set of > 1Gbps links. > > Mark. > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- Tim:> _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/