Hi, I have a Cisco WS-C2960G-24TC-L switch(IOS c2960-lanbasek9-mz.150-2.SE7.bin) and Cisco 1841 router(IOS c1841-advipservicesk9-mz.151-4.M1.bin) connected like this:
sw1[Gi0/3] <-> [Fa0/0]r3 If I pull out the cable from "sw1" port Gi0/3, then "r3" detects this with 5 - 7 second delay. I configured "carrier-delay msec 0" under "r3" interface Fa0/0, but this did not help. For example here: http://s1.postimg.org/9zf76q0el/cable_removed_from_sw1_Gi0_3.png "sw1" detects that the port Gi0/3 went down at 15:10:57 - 15:10:58, but "r3" detected this 15:11:04 - 15:11:05. Clock in all the devices is exactly the same. What might cause such behavior? thanks, Martin _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
