Hello,
I'm trying to make some graphs to see how much IPv6 traffic we are
doing. I'm using MIB ipIfStatsHCInOctets.
IPv6 incoming: 1.3.6.1.2.1.4.31.3.1.6.2
IPv6 outgoing: 1.3.6.1.2.1.4.31.3.1.33.2
To see if I do it correctly I also create the graphs for IPv4 from the
same MIB,
IPv4 incoming: 1.3.6.1.2.1.4.31.3.1.6.1
IPv6 outgoing: 1.3.6.1.2.1.4.31.3.1.33.1
But when comparing them with existing graphs that use
1.3.6.1.2.1.31.1.1.1.6 (ifHCInOctets) and 1.3.6.1.2.1.31.1.1.1.10
(ifHCOutOctets) for in and out respectively I don't get the same
results, there is about a 20% increase.
Can someone clear this up for me? I'm I using the correct OID's?
Chiel
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
